12 Optimizing Performance of OCCI Applications

This chapter describes a few suggestions that lead to better performance for your OCCI custom applications.

This chapter contains these topics:

Transparent Application Failover
Connection Sharing
Application Managed Data Buffering
Array Fetch Using next() Method
Modifying Rows Iteratively
Run-time Load Balancing of the Stateless Connection Pool
Fault Diagnosability
Client Result Cache

See Also:

Chapter 13, "OCCI Application Programming Interface"

Transparent Application Failover

OCCI Transparent Application Failover enables OCCI to be more robust in handling database instance failures in distributed applications at run time. If a server node becomes unavailable, applications automatically reconnect to another surviving node.

Some design options should be considered when including Transparent Application Failover in an application:

Because of the delays inherent to failover processing, the design of the application may include a notice to the user that a failover is in progress and that normal operation should resume shortly.
If the session on the initial instance received ALTER SESSION commands before the failover began, they are not automatically replayed on the second instance.

Consequently, the developer may want to replay these ALTER SESSION commands on the second instance.

It is the user's responsibility to track changes to the SESSION parameters.

To address these problems, the application can register a failover callback function. After a failover, the callback function is invoked at different times while reestablishing the user's session.

The first call to the callback function occurs when Oracle first detects an instance connection loss. This callback is intended to allow the application to inform the user of an upcoming delay.
If failover is successful, a second call to the callback function occurs when the connection is reestablished and usable. At this time the client may want to replay ALTER SESSION commands and inform the user that failover has happened. Note that you must keep track of SESSION parameter changes and then replay them after the failover is complete.

If failover is unsuccessful, then the callback function is called to inform the application that failover cannot take place.
An initial attempt at failover may not always successful. The failover callback should return FO_RETRY to indicate that the failover should be attempted again.
See Also:
- Definition of FailOverType and FailOverEventType in Table 13-11, "Enumerated Values Used by Connection Class" in Chapter 13, "OCCI Application Programming Interface"
- Oracle Database Net Services Reference for more detailed information about application failover.

Using Transparent Application Failover

To enable TAF, the connect string has to be configured for failover and registered on Connection (created from Environment, ConnectionPool and StatelessConnectionPool). To register the callback function, use the Connection Class interface setTAFNotify().

void Connection::setTAFNotify(
   int (*notifyFn)(
      Environment *env,
      Connection *conn,
      void *ctx,
      FailOverType foType,
      FailOverEventType foEvent),
   void *ctxTAF);

Note that TAF support for ConnectionPools does not include BACKUP and PRECONNECT clauses; these should not be used in the connect string.

Objects and Transparent Application Failover

Transparent application failover works with the OCCI navigational and associative access models and the object cache. In a non-RAC setup, you must ensure that the object type definitions and object OIDs in primary and backup instances are identical.

If the application receives ORA-25402: transaction must roll back error after the failover, then it must initiate a rollback to correctly reset the object cache on the client. If a transaction has not started before the failover, the application should still initiate a rollback after the failover to refresh the objects on the client object cache from the new instance.

Connection Pooling and Transparent Application Failover

If the transparent application failover feature is activated, connections created in a connection pool are also failed over. The application failover callback must be specified for each connection obtained from the connection pool; these connections are failed over when used after the primary instance failure.

Connection Sharing

This section covers the following topics:

Introduction to Thread Safety
Implementing Thread Safety
Serialization

Introduction to Thread Safe ty

Threads are lightweight processes that exist within a larger process. Threads each share the same code and data segments, but have their own program counters, system registers, and stack. Global and static variables are common to all threads, and a mutual exclusivity mechanism may be required to manage access to these variables from multiple threads within an application.

Once spawned, threads run asynchronously to one another. They can access common data elements and make OCCI calls in any order. Because of this shared access to data elements, a mechanism is required to maintain the integrity of data being accessed by multiple threads. The mechanism to manage data access takes the form of mutexes (mutual exclusivity locks), which ensure that no conflicts arise between multiple threads that are accessing shared resources within an application. In OCCI, mutexes are granted on an OCCI environment basis.

This thread safety feature of the Oracle database server and OCCI library enables developers to use OCCI in a multithreaded application with these added benefits:

Multiple threads of execution can make OCCI calls with the same result as successive calls made by a single thread.
When multiple threads make OCCI calls, there are no side effects between threads.
Even if you do not write a multithreaded program, you do not pay any performance penalty for including thread-safe OCCI calls.
Use of multiple threads can improve program performance. You can discern gains on multiprocessor systems where threads run concurrently on separate processors, and on single processor systems where overlap can occur between slower operations and faster operations.

In addition to client/server applications, where the client can be a multithreaded program, thread safety is typically used in three-tier or client/agent/server architectures. In this architecture, the client is concerned only with presentation services. The agent (or application server) processes the application logic for the client application. Typically, this relationship is a many-to-one relationship, with multiple clients sharing the same application server.

The server tier in the three-tier architecture is an Oracle database server. The applications server (agent) supports multithreading, with each thread serving a separate client application. In an Oracle environment, this middle-tier application server is an OCCI or precompiler program.

Implementing Threa d Safety

To take advantage of thread safety by using OCCI, an application must be running in a thread-safe operating system. Then the application must inform OCCI that the application is running in multithreaded mode by specifying THREADED_MUTEXED or THREADED_UNMUTEXED for the mode parameter of the createEnvironment() method. For example, to turn on mutual exclusivity locking, issue the following statement:

Environment *env = Environment::createEnvironment( 
          Environment::THREADED_MUTEXED);

Note that once createEnvironment is called with THREADED_MUTEXED or THREADED_UNMUTEXED, all subsequent calls to the createEnvironment method must also be made with THREADED_MUTEXED or THREADED_UNMUTEXED modes.

If a multithreaded application is running in a thread-safe operating system, then the OCCI library manages mutexes for the application on a for each-OCCI-environment basis. However, you can override this feature and have your application maintain its own mutex scheme. This is done by specifying a mode value of THREADED_UNMUTEXED to the createEnvironment() method.

Applications that run on non-thread-safe platforms should not pass a value of THREADED_MUTEXED or THREADED_UNMUTEXED to the createEnvironment() method.

If an application is single threaded, regardless of whether the platform is thread safe, the application should pass a value of Environment::DEFAULT to the createEnvironment() method. This is also the default value for the mode parameter. Single threaded applications which run in THREADED_MUTEXED mode may incur performance degradation.

OCCI does not support nonblocking mode.

Serialization

As an application programmer, you have two basic options regarding concurrency in a multithreaded application:

Automatic serialization, in which you use OTIS's transparent mechanisms
Application-provided serialization, in which you manage the contingencies involved in maintaining multiple threads

Automatic Serialization

In cases where there are multiple threads operating on objects (connections and connection pools) derived from an OCCI environment, you can elect to let OCCI serialize access to those objects. The first step is to pass a value of THREADED_MUTEXED to the createEnvironment method. At this point, the OCCI library automatically acquires a mutex on thread-safe objects in the environment.

When the OCCI environment is created with THREADED_MUTEXED mode, then only the Environment, Map, ConnectionPool, StatelessConnectionPool and Connection objects are thread-safe. That is, if two threads make simultaneous calls on one of these objects, then OCCI serializes them internally. However, note that all other OCCI objects, such as Statement, ResultSet, SQLException, Stream, and so on, are not thread-safe as, applications should not operate on these objects simultaneously from multiple threads.

Note that the bulk of processing for an OCCI call happens on the server, so if two threads that use OCCI calls go to the same connection, then one of them could be blocked while the other finishes processing at the server.

Application-Provided Serialization

In cases where there are multiple threads operating on objects derived from an OCCI environment, you can chose to manage serialization. The first step is to pass a value of THREADED_UNMUTEXED for the createEnvironment mode. In this case the application must mutual exclusively lock OCCI calls made on objects derived from the same OCCI environment. This has the advantage that the mutex scheme can be optimized based on the application design to gain greater concurrency.

When an OCCI environment is created in this mode, OCCI recognizes that the application is running in a multithreaded application, but that OCCI need not acquire its internal mutexes. OCCI assumes that all calls to methods of objects derived from that OCCI environment are serialized by the application. You can achieve this two different ways:

Each thread has its own environment. That is, the environment and all objects derived from it (connections, connection pools, statements, result sets, and so on) are not shared across threads. In this case your application need not apply any mutexes.
If the application shares an OCCI environment or any object derived from the environment across threads, then it must serialize access to those objects (by using a mutex, and so on) such that only one thread is calling an OCCI method on any of those objects.

Basically, in both cases, no mutexes are acquired by OCCI. You must ensure that only one OCCI call is in process on any object derived from the OCCI environment at any given time when THREADED_UNMUTEXED is used.

OCCI is optimized to reuse objects as much as possible. Since each environment has its own heap, multiple environments result in increased consumption of memory. Having multiple environments may imply duplicating work regarding connections, connection pools, statements, and result set objects. This results in further memory consumption.

Having multiple connections to the server results in more resource consumptions on the server and network. Having multiple environments would normally entail more connections.

Application Managed Data Buffering

When you provide data for bind parameters by the setxxx methods in parameterized statements, the values are copied into an internal data buffer, and the copied values are then provided to the database server for insertion. To reduce overhead of copying string type data that is available in user buffers, use the setDataBuffer() and next() methods of the ResultSet Class and the execute() method of the Statement Class.

setD ataBuffer() Method

For high performance applications, OCCI provides the setDataBuffer method whereby the data buffer is managed by the application. The following example shows the setDataBuffer() method:

void setDataBuffer(int paramIndex,
   void *buffer,
   Type type,
   sb4 size,
   ub2 *length,
   sb2 *ind = NULL, 
   ub2 *rc = NULL);

The following parameters are used in the previous method example:

paramIndex: Parameter number
buffer: Data buffer containing data
type: Type of the data in the data buffer
size: Size of the data buffer
length: Current length of data in the data buffer
ind: Indicator information. This indicates whether the data is NULL or not. For parameterized statements, a value of -1 means a NULL value is to be inserted. For data returned from callable statements, a value of -1 means NULL data is retrieved.
rc: Return code. This variable is not applicable to data provided to the Statement method. However, for data returned from callable statements, the return code specifies parameter-specific error numbers.

Not all data types can be provided and retrieved by the setDataBuffer() method. For instance, C++ Standard Library strings cannot be provided with the setDataBuffer() interface.

There is an important difference between the data provided by the setxxx() methods and setDataBuffer() method. When data is copied in the setxxx() methods, the original can change once the data is copied. For example, you can use a setString(str1) method, then change the value of str1 before execute. The value of str1 that is used is the value at the time setString(str1) is called. However, for data provided by the setDataBuffer() method, the buffer must remain valid until the execution is completed.

If iterative executes or the executeArrayUpdate() method is used, then data for multiple rows and iterations can be provided in a single buffer. In this case, the data for the ith iteration is at buffer + (i-1) *size address and the length, indicator, and return codes are at *(length + i), *(ind + i), and *(rc + i) respectively.

This interface is also meant for use with array executions and callable statements that have array or OUT bind parameters.

The same method is available in the ResultSet class to retrieve data without re-allocating the buffer for each fetch.

executeArra yUpdate() Method

If all data is provided with the setDataBuffer() methods or output streams (that is, no setxxx() methods besides setDataBuffer() or getStream() are called), then there is a simplified way of doing iterative execution.

In this case, you should not call setMaxIterations() and setMaxParamSize(). Instead, call the setDataBuffer() or getStream() method for each parameter with the appropriate size arrays to provide data for each iteration, followed by the executeArrayUpdate(int arrayLength) method. The arrayLength parameter specifies the number of elements provided in each buffer. Essentially, this is same as setting the number of iterations to arrayLength and executing the statement.

Since the stream parameters are specified only once, they can be used with array executes as well. However, if any setxxx() methods are used, then the addIteration() method is called to provide data for multiple rows. To compare the two approaches, consider Example 12-1 that inserts two employees in the employees table:

Example 12-1 How to Insert Records Using the addIteration() method

Statement *stmt = conn->createStatement(
  "insert into departments (department_id, department_name) values(:1, :2)"); 
char dnames[][100] = {"Community Outreach", "University Recruiting"}; 
ub2 dnameLen[2]; 

for (int i = 0; i < 2; i++) 
  dnameLen[i] = strlen(dnames[i] + 1);

stmt->setMaxIterations(2);    // set maximum number of iterations 

stmt->setInt(1, 7369);        // specify data for the first row 
stmt->setDataBuffer(2, dnames, OCCI_SQLT_STR, sizeof(dnames[0]), dnameLen); 
stmt->addIteration(); 

stmt->setInt(1, 7654);        // specify data for the second row 
                              // a setDatBuffer is unnecessary for the second 
                              // bind parameter as data provided through
                              // setDataBuffer is specified only once. 
stmt->executeUpdate();

However, if the first parameter could also be provided through the setDataBuffer() interface, then, instead of the addIteration() method, you would use the executeArrayUpdate() method, as shown in Example 12-2:

Example 12-2 How to Insert Records Using the executeArrayUpdate() Method

Statement *stmt = conn->createStatement(
  "insert into departments (department_id, department_name) values(:1, :2)"); 
char dnames[][100] = {"Community Outreach", "University Recruiting"}; 
ub2 dnameLen[2]; 

for (int i = 0; i < 2; i++) 
  dnameLen[i] = strlen(dnames[i] + 1); 

int ids[2] = {7369, 7654}; 
ub2 idLen[2] = {sizeof(ids[0]), sizeof(ids[1])}; 
stmt->setDataBuffer(1, ids, OCCIINT, sizeof(ids[0]), idLen); 
stmt->setDataBuffer(2, dnames, OCCI_SQLT_STR, sizeof(dnames[0]), dnameLen); 

stmt->executeArrayUpdate(2);      // data for two rows is inserted.

Array Fetch Using next() Method

If the application is fetching data with only the setDataBuffer() interface or the stream interface, then an array fetch can be executed. The array fetch is implemented through the next() method of the ResultSet class. You must process the results obtained through next() before calling it again.

Example 12-3 How to use Array Fetch with a ResultSet

ResultSet *resultSet = stmt->executeQuery(...);
resultSet->setDataBuffer(...);
while (resultSet->next(numRows) == DATA_AVAILABLE)
   process(resultSet->getNumArrayRows() );

This causes up to numRows amount of data to be fetched for each column. The buffers specified with the setDataBuffer() interface should large enough to hold at least numRows of data.

Modifying Rows Iteratively

To process batch errors, specify that the Statement object is in a batchMode of execution using the setBatchErrorMode() method. Once the batchMode is set and a batch update runs, any resulting errors are reported through the BatchSQLException Class.

The BatchSQLException class provides methods that handle batch errors. Example 12-4 illustrates how batch handling can be implemented within any OCCI application.

Example 12-4 How to Modify Rows Iteratively and Handle Errors

Create the Statement object and set its batch error mode to TRUE.

Statement *stmt = conn->createStatement ("...");
stmt->setBatchErrorMode (true);

Perform programmatic changes necessary by the application.

Update the statement.

try {
  updateCount = stmt->executeUpdate ();
}

Catch and handle any errors generated during the batch insert or update.

catch (BatchSQLException &batchEx)
{
  cout<<"Batch Exception: "<<batchEx.what()<<endl;
  int errCount = batchEx.getFailedRowCount();
  cout << "Number of rows failed " << errCount <endl;
  for (int i = 0; i < errCount; i++ )
  {
    SQLException err = batchEx.getException(i);
    unsigned int rowIndex = batchEx.getRowNum(i);
    cout<<"Row " << rowIndex << " failed because of "
       << err.getErrorCode() << endl; 
  }
  // take recovery action on the failed rows
}

Catch and handle other errors generated during the statement update. Note that statement-level errors are still thrown as instances of a SQLException.
```
catch( SQLException &ex) // to catch other SQLExceptions.
{
   cout << "SQLException: " << e.what() << endl;
}
```

Run-time Load Balancing of the Stateless Connection Pool

Run-time load balancing in a stateless connection pool dynamically routs connection requests to the least loaded instance of the database. This is achieved by use of service metrics, which are distributed by the RAC load-balancing advisory.

The feature modifies the stateless connection pool in the following ways:

The pool receives periodic notifications about the instance load.
When a request for a connection is received, the pool picks the best possible connection for the type of request, based on the load of the instance.
The stateless connection pool periodically terminates connections of overloaded instances, maintaining the connection topology that corresponds to the instance load.
Since the connections to overloaded instances may be terminated, the pool creates new connections to maintain the concurrency requirement. These new connections are created using the connect-time load balancing of the RAC listener.

Run-time load balancing is turned on by default when the OCCI environment is created in THREADED_MUTEXED and EVENTS modes, and when the server is configured to issue event notifications.

API Support

New NO_RLB option for the PoolType attribute of the StatelessConnectionPool Class disables run-time load balancing.

Fault Diagnosability

Fault diagnosability captures diagnostic data, such as dump files or core dump files, on the OCCI client when a problem incident occurs. For each incident, the fault diagnosability feature creates an Automatic Diagnostic Repository (ADR) subdirectory for storing this diagnostic data. For example, if either a Linux or a UNIX application fails with a null pointer reference, then the core file appears in the ADR home directory (if it exists), not in the operating system directory. This section discusses the ADR subdirectory structure and the utility to manage its output, the ADR Command Interpreter (ADRCI).

An ADR home is the root directory for all diagnostic data for an instance of a product, such as OCCI, and a particular operating system user. All ADR homes appear under the same root directory, the ADR base.

See Also:

Oracle Database Administrator's Guide

ADR Base Location

The location of the ADR base is determined in the following order:

In the sqlnet.ora file (on Windows, in the %TNS_ADMIN% directory, or on Linux or UNIX, in the $TNS_ADMIN directory).

If there is no TNS_ADMIN directory, then sqlnet.ora is stored in the current directory.

If the ADR base is listed in the sqlnet.ora file, it is a statement of the type:
```
ADR_BASE=/directory/adr
```
where:
- The adr argument is a directory that must exist and be writable by all operating system users who execute OCCI applications and want to share the same ADR base.
- The directory argument is the path name
If ADR_BASE is set, and if all users share a single sqlnet.ora file, then OCCI stops searching when directory adr does not exist or if it is not writable. If ADR_BASE is not set, then OCCI continues the search, testing for the existence of other specific directories.

For example, if sqlnet.ora contains the entry ADR_BASE=/home/chuck/test then:
- ADR base is:
```
/home/chuck/test/oradiag_chuck
```
- ADR home may be:
```
/home/chuck/test/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11
```
If the Oracle base exists (on Windows: %ORACLE_BASE%, or on Linux and UNIX: $ORACLE_BASE), the client subdirectory also exists because it is created by the Oracle Universal Installer when the database is installed.

For example, if $ORACLE_BASE is /home/chuck/obase , then:
- ADR base is:
```
/home/chuck/obase
```
- ADR home may be:
```
/home/chuck/obase/diag/clients/user_chuck/host_4144260688_11
```
If the Oracle home exists (on Windows: %ORACLE_HOME% , or on Linux and UNIX: $ORACLE_HOME), the client subdirectory also exists because it is created by the Oracle Universal Installer when the database is installed.

For example, if $ORACLE_HOME is /ade/chuck_l1/oracle , then:
- ADR base is:
```
/ade/chuck_l1/oracle/log
```
- ADR home may be:
```
/ade/chuck_l1/oracle/log/diag/clients/user_chuck/host_4144260688_11
```
On the operating system home directory.
- On Windows, the operating system home directory is %USERPROFILE%.
  
  The location of folder Oracle is at:
```
C:\Documents and Settings\chuck
```
  If the application runs as a service, the home directory option is skipped.
- On Linux and UNIX, the operating system home directory is $HOME.
  
  The location may be:
```
/home/chuck/oradiag_chuck
```
For example, in an Instant Client, if $HOME is /home/chuck, then:
- ADR base is:
```
/home/chuck/oradiag_chuck
```
- ADR home may be:
```
/home/chuck/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11
```
See Also:
"Instant Client"
In the temporary directory.
- On Windows, the temporary directories are searched in the following order:
  - %TMP%
  - %TEMP%
  - %USERPROFILE%
  - Windows system directory
- On Linux and UNIX, the temporary directory is in /var/tmp.
For example, in an Instant Client, if $HOME is not writable, then:
- ADR base is:
```
/var/tmp/oradiag_chuck
```
- ADR home may be:
```
/var/tmp/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11
```

If none of these directory choices are available and writable, ADR is not created and diagnostics are not stored.

See Also:

Oracle Database Net Services Reference

Using ADRCI

ADRCI is a command-line tool that enables you to view diagnostic data within the ADR, and to package incident and problem information into a zip file that can be shared with Oracle Support. ADRCI can be used either interactively and through a script.

A problem is a critical error in OCI or the client. Each problem has a problem key. An incident is a single occurrence of a problem, and it is identified by a unique numeric incident ID. Each incident has a problem key which has a set of attributes: the ORA error number, error parameter values, and similar information. Two incidents have the same root cause if their problem keys match.

The following examples demonstrate how to use ADRCI on a Linux operating system. Note that ARDCI commands are case-insensitive. All user input is in bold typeface.

Example 12-5 How to Use ADRCI for OCCI Application Incidents

To launch ADRCI in a Linux system, use the adrci command. Once ADRCI starts, find out the particulars of the show base command with help, and then determine the base of a particular client using the -product client option (necessary for OCCI applications). To set the ADRCI base, use the set base command. Once ADRCI starts, then the default ADR base is for the rdbms server. The $ORACLE_HOME is set to /ade/chuck_l3/oracle. To view the incidents, use the show incidents command. to exit ADRCI, use the quit command.

% adrci 

ADRCI: Release 11.2. - on Wed November 25 16:16:55 2008
 
Copyright (c) 1982, 2008, Oracle.  All rights reserved.

adrci> help show base
 
  Usage: SHOW BASE [-product <product_name>]
 
  Purpose: Show the current ADR base setting.
 
  Options:
    [-product <product_name>]: This option allows users to show the
    given product's ADR Base location. The current registered products are
    "CLIENT" and "ADRCI".
 
  Examples: 
    show base -product client
    show base
 
adrci> show base -product client
ADR base is "/ade/chuck_l3/oracle/log"

adrci> help set base
 
  Usage:  SET BASE <base_str>
 
  Purpose: Set the ADR base to use in the current ADRCI session.
           If there are valid ADR homes under the base, all homes 
           are added to the current ADRCI session.
 
  Arguments:
    <base_str>: It is the ADR base directory, which is a system-dependent
    directory path string.
 
  Notes:
    On platforms that use "." to signify current working directory,
    it can be used as base_str.
 
  Example: 
    set base /net/sttttd1/scratch/someone/view_storage/someone_v1/log
    set base .

adrci> set base /ade/chuck_l3/oracle/log

adrci> show incidents
...
adrci> quit

Example 12-6 How to Use ADRCI for Instant Client

Because Instant Client does not use $ORACLE_HOME, the default ADR base is the user's home directory.

adrci> show base -product client
ADR base is "/home/chuck/oradiag_chuck"
adrci> set base /home/chuck/oradiag_chuck
adrci> show incidents
 
ADR Home = /home/chuck/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11:
*************************************************************************
INCIDENT_ID    PROBLEM_KEY           CREATE_TIME
-------------------------------------------------------------------------
1                     oci 24550 [6]              2007-05-01 17:20:02.803697 -07:00                      
1 rows fetched
 
adrci> quit

See Also:

Oracle Database Utilities for an introduction to the ADRCI
"Instant Client"

Controlling ADR Creation and Disabling Fault Diagnosability

To disable the fault diagnosability feature, you must turn off the capture of diagnositics. Edit the sqlnet.ora file by changing the values of the DIAG_ADR_ENABLED and DIAG_DDE_ENABLED parameters to FALSE; the default values are TRUE.

To turn off the OCCI signal handler and to re-enable standard operating system failure processing, edit the sqlnet.ora file by adding the corresponding parameter: DIAG_SIGHANDLER_ENABLED=FALSE.

See Also:

Oracle Database Net Services Reference

Client Result Cache

The Client Result Cache improves the response times of queries that are executed repeatedly. This feature uses client memory to cache results of SQL queries executed and fetched from the database. Subsequent execution of the same query fetches the results from the client cache, reducing server CPU usage. Because database roundtrips are eliminated, applications have improved response times.

OCCI applications may transparently use the Client Result Cache feature by enabling OCCI statement caching. Note that SELECT queries that must be cached are annotated with a /*+ result_cache */ hint. Example 12-7 shows how to create a OCCI Statement object that uses such a SELECT query.

Example 12-7 How to Enable and Use the Client Result Cache

Connection *conn;
Statement *stmt;
ResultSet *rs;
 
...
//enable OCCI Statement Caching
conn->setStmtCacheSize(20);
 
//Specify the hint in the SELECT query
stmt = conn->createStatement("select /*+ result_cache */ * from products \
                              where product_id = :1");
 
//the following execute fetches rows from the client cache if
//the query results are cached. If this is the first execute
//of the query, the results fetched from the server are
//cached on the client side.
rs = stmt->executeQuery();

For usage guidelines, cache consistency, and restrictions, see Oracle Call Interface Programmer's Guide.

12 Optimizing Performance of OCCI Applications

Transparent Application Failover

Using Transparent Application Failover

Objects and Transparent Application Failover

Connection Pooling and Transparent Application Failover

Connection Sharing

Introduction to Thread Safety

Implementing Thread Safety

Serialization

Automatic Serialization

Application-Provided Serialization

Application Managed Data Buffering

setDataBuffer() Method

executeArrayUpdate() Method

Array Fetch Using next() Method

Modifying Rows Iteratively

Run-time Load Balancing of the Stateless Connection Pool

API Support

Fault Diagnosability

ADR Base Location

Using ADRCI

Controlling ADR Creation and Disabling Fault Diagnosability

Client Result Cache

Introduction to Thread Safe ty

Implementing Threa d Safety

setD ataBuffer() Method

executeArra yUpdate() Method