2 OWL Concepts

2.1.1 Example: Cancer Ontology

Figure 2-1 shows part of a cancer ontology, which describes the classes and properties related to cancer. One requirement is to have a PATIENTS data table with a column named DIAGNOSIS, which must contain a value from the Diseases_and_Disorders class hierarchy.

Figure 2-1 Cancer Ontology Example

Description of "Figure 2-1 Cancer Ontology Example"

In the cancer ontology shown in Figure 2-1, the diagnosis Immune_System_Disorder includes two subclasses, Autoimmune_Disease and Immunodeficiency_Syndrome. The Autoimmune_Disease diagnosis includes the subclass Rheumatoid_Arthritis; and the Immunodeficiency_Syndrome diagnosis includes the subclass T_Cell_Immunodeficiency, which includes the subclass AIDS.

The data in the PATIENTS table might include the PATIENT_ID and DIAGNOSIS column values shown in Table 2-1.

To query ontologies, you can use the SEM_MATCH table function (described in Section 1.6) or the SEM_RELATED operator and its ancillary operators (described in Section 2.3).

2.1.2 Supported OWL Subsets

This section describes OWL vocabulary subsets that are supported.

Oracle Database supports the RDFS++, OWLSIF, and OWLPrime vocabularies, which have increasing expressivity. Each supported vocabulary has a corresponding rulebase; however, these rulebases do not need to be populated because the underlying entailment rules of these three vocabularies are internally implemented. The supported vocabularies are as follows:

• RDFS++: A minimal extension to RDFS; which is RDFS plus owl:sameAs and owl:InverseFunctionalProperty.

• OWLSIF: OWL with IF Semantic, with the vocabulary and semantics proposed for pD* semantics in Completeness, decidability and complexity of entailment for RDF Schema and a semantic extension involving the OWL vocabulary, by H.J. Horst, Journal of Web Semantics 3, 2 (2005), 79–115.

• OWLPrime: The following OWL capabilities:

  • Basics: class, subclass, property, subproperty, domain, range, type

  • Property characteristics: transitive, symmetric, functional, inverse functional, inverse

  • Class comparisons: equivalence, disjointness

  • Property comparisons: equivalence

  • Individual comparisons: same, different

  • Class expressions: complement

  • Property restrictions: hasValue, someValuesFrom, allValuesFrom

    As with pD*, the supported semantics for these value restrictions are only intensional (IF semantics).

The following OWL capabilities are not yet supported in any Oracle-supported OWL subset:

• Property restrictions: cardinality

• Class expressions: set operations (union, intersection), enumeration

Table 2-2 lists the RDFS/OWL vocabulary constructs included in each supported rulebase.

2.2.1 Creating a Simple OWL Ontology

Example 2-1 creates a simple OWL ontology, inserts one statement that two URIs refer to the same entity, and performs a query using the SEM_MATCH table function

SQL> CREATE TABLE owltst(id number, triple sdo_rdf_triple_s);
Table created.
 
SQL> EXECUTE sem_apis.create_sem_model('owltst','owltst','triple');
PL/SQL procedure successfully completed.
 
SQL> INSERT INTO owltst VALUES (1, sdo_rdf_triple_s('owltst',
       'http://example.com/name/John', 'http://www.w3.org/2002/07/owl#sameAs', 
       'http://example.com/name/JohnQ'));
1 row created.
 
SQL> commit;
 
SQL> -- Use SEM_MATCH to perform a simple query.
SQL> select s,p,o from table(SEM_MATCH('(?s ?p  ?o)', SEM_Models('OWLTST'),
           null,  null, null ));

2.2.2 Performing Native OWL inferencing

Example 2-2 calls the SEM_APIS.CREATE_ENTAILMENT procedure. You do not need to create the rulebase and add rules to it, because the OWL rules are already built into the Oracle semantic technologies inferencing engine.

SQL> -- Invoke the following command to run native OWL inferencing that
SQL> -- understands the vocabulary defined in the preceding section.
SQL>
SQL>  EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), sem_rulebases('OWLPRIME'));
PL/SQL procedure successfully completed.
 
SQL> -- The following view is generated to represent the entailed graph (rules index).
SQL> desc mdsys.semi_owltst_idx;
 
SQL> -- Run the preceding query with an additional rulebase parameter to list
SQL> -- the original graph plus the inferred triples.
SQL> SELECT s,p,o FROM table(SEM_MATCH('(?s ?p  ?o)', SEM_MODELS('OWLTST'),
           SEM_RULEBASES('OWLPRIME'),  null, null ));

2.2.3 Performing OWL and User-Defined Rules inferencing

Example 2-3 creates a user-defined rulebase, inserts a simplified uncleOf rule (stating that the brother of one's father is one's uncle), and calls the SEM_APIS.CREATE_ENTAILMENT procedure.

SQL> -- First, insert the following assertions.
 
SQL> INSERT INTO owltst VALUES (1, sdo_rdf_triple_s('owltst',
       'http://example.com/name/John', 'http://example.com/rel/fatherOf',
       'http://example.com/name/Mary'));
 
 
SQL> INSERT INTO owltst VALUES (1, sdo_rdf_triple_s('owltst',
       'http://example.com/name/Jack', 'http://example.com/rel/brotherOf',
       'http://example.com/name/John'));
 
SQL> -- Create a user-defined rulebase.
 
SQL> EXECUTE sem_apis.create_rulebase('user_rulebase');
 
SQL> -- Insert a simple "uncle" rule.
 
SQL> INSERT INTO mdsys.semr_user_rulebase VALUES ('uncle_rule', 
'(?x <http://example.com/rel/brotherOf> ?y)(?y <http://example.com/rel/fatherOf> ?z)',
NULL, '(?x <http://example.com/rel/uncleOf> ?z)', null);
 
SQL>  -- In the following statement, 'USER_RULES=T' is required, to
SQL> --  include the original graph plus the inferred triples.
SQL> EXECUTE sem_apis.create_entailment('owltst2_idx', sem_models('owltst'),
          sem_rulebases('OWLPRIME','USER_RULEBASE'), 
          SEM_APIS.REACH_CLOSURE, null, 'USER_RULES=T');
 
SQL> -- In the result of the following query, :Jack :uncleOf :Mary is inferred.
SQL> SELECT s,p,o FROM table(SEM_MATCH('(?s ?p  ?o)',
           SEM_MODELS('OWLTST'),
           SEM_RULEBASES('OWLPRIME','USER_RULEBASE'),  null, null ));

2.2.4 Generating OWL inferencing Proofs

OWL inference can be complex, depending on the size of the ontology, the actual vocabulary (set of language constructs) used, and the interactions among those language constructs. To enable you to find out how a triple is derived, you can use proof generation during inference. (Proof generation does require additional CPU time and disk resources.)

To generate the information required for proof, specify PROOF=T in the call to the SEM_APIS.CREATE_ENTAILMENT procedure, as shown in the following example:

EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), -
  sem_rulebases('owlprime'), SEM_APIS.REACH_CLOSURE, 'SAM', 'PROOF=T');

Specifying PROOF=T causes a view to be created containing proof for each inferred triple. The view name is the entailment name prefixed by MDSYS.SEMI_. Two relevant columns in this view are LINK_ID and EXPLAIN (the proof). The following example displays the LINK_ID value and proof of each generated triple (with LINK_ID values shortened for simplicity):

SELECT link_id || ' generated by ' || explain as 
          triple_and_its_proof FROM mdsys.semi_owltst_idx;
 
TRIPLE_AND_ITS_PROOF
--------------------------------------------------------------------
8_5_5_4 generated by 4_D_5_5 : SYMM_SAMH_SYMM
8_4_5_4 generated by 8_5_5_4 4_D_5_5 : SAM_SAMH
. . .

A proof consists of one or more triple (link) ID values and the name of the rule that is applied on those triples:

link-id1 [link-id2 ... link-idn] : rule-name

To get the full subject, predicate, and object URIs for proofs, you can query the model view and the entailment (rules index) view. Example 2-4 displays the LINK_ID value and associated triple contents using the model view MDSYS.SEMM_OWLTST and the entailment view MDSYS.SEMI_OWLTST_IDX.

SELECT to_char(x.triple.rdf_m_id, 'FMXXXXXXXXXXXXXXXX') ||'_'||
       to_char(x.triple.rdf_s_id, 'FMXXXXXXXXXXXXXXXX') ||'_'||
       to_char(x.triple.rdf_p_id, 'FMXXXXXXXXXXXXXXXX') ||'_'||
       to_char(x.triple.rdf_c_id, 'FMXXXXXXXXXXXXXXXX'),
       x.triple.get_triple()
  FROM (
   SELECT sdo_rdf_triple_s(
           t.canon_end_node_id,
           t.model_id, 
           t.start_node_id,
           t.p_value_id,
           t.end_node_id) triple
     FROM (select * from mdsys.semm_owltst union all
           select * from mdsys.semi_owltst_idx
          ) t  
    WHERE t.link_id IN ('4_D_5_5','8_5_5_4')
  ) x;
 
   LINK_ID  X.TRIPLE.GET_TRIPLE()(SUBJECT, PROPERTY, OBJECT)
----------  --------------------------------------------------------------
4_D_5_5 SDO_RDF_TRIPLE('<http://example.com/name/John>', '<http://www.w3.org/2002/07/owl#sameAs>', '<http://example.com/name/JohnQ>')
8_5_5_4 SDO_RDF_TRIPLE('<http://example.com/name/JohnQ>', '<http://www.w3.org/2002/07/owl#sameAs>', '<http://example.com/name/John>')

In Example 2-4, for the proof entry 8_5_5_4 generated by 4_D_5_5 : SYMM_SAMH_SYMM for the triple with LINK_ID = 8_5_5_4, it is inferred from the triple with 4_D_5_5 using the symmetricity of owl:sameAs.

If the entailment status is INCOMPLETE and if the last entailment was generated without proof information, you cannot invoke SEM_APIS.CREATE_ENTAILMENT with PROOF=T. In this case, you must first drop the entailment and create it again specifying PROOF=T.

2.2.5 Validating OWL Models and Entailments

An OWL ontology may contain errors, such as unsatisfiable classes, instances belonging to unsatisfiable classes, and two individuals asserted to be same and different at the same time. You can use the SEM_APIS.VALIDATE_MODEL and SEM_APIS.VALIDATE_ENTAILMENT functions to detect inconsistencies in the original data model and in the entailment, respectively.

Example 2-5 shows uses the SEM_APIS.VALIDATE_ENTAILMENT function, which returns a null value if no errors are detected or a VARRAY of strings if any errors are detected.

SQL>  -- Insert an offending triple.
SQL>  insert into owltst values (1, sdo_rdf_triple_s('owltst',
             'urn:C1', 'http://www.w3.org/2000/01/rdf-schema#subClassOf', 'http://www.w3.org/2002/07/owl#Nothing'));
 
SQL> -- Drop entailment first.
SQL>  exec sem_apis.drop_entailment('owltst_idx');
PL/SQL procedure successfully completed.
 
SQL> -- Perform OWL inferencing.
SQL> exec sem_apis.create_entailment('owltst_idx', sem_models('OWLTST'), sem_rulebases('OWLPRIME'));
PL/SQL procedure successfully completed.
 
SQL > set serveroutput on; 
SQL > -- Now invoke validation API: sem_apis.validate_entailment
SQL > 
declare 
  lva mdsys.rdf_longVarcharArray; 
  idx int; 
begin 
  lva := sem_apis.validate_entailment(sem_models('OWLTST'), sem_rulebases('OWLPRIME')) ; 
 
  if (lva is null) then
   dbms_output.put_line('No errors found.');
  else 
    for idx in 1..lva.count loop 
      dbms_output.put_line('Offending entry := ' || lva(idx)) ; 
    end loop ; 
  end if;
end ; 
/ 
 
SQL> -- NOTE: The LINK_ID value and the numbers in the following
SQL> -- line are shortened for simplicity in this example. -- 

          Offending entry  := 1 10001 (4_2_4_8 2 4 8) Unsatisfiable class.

Each item in the validation report array includes the following information:

• Number of triples that cause this error (1 in Example 2-5)

• Error code (10001 Example 2-5)

• One or more triples (shown in parentheses in the output; (4_2_4_8 2 4 8) in Example 2-5).

  These numbers are the LINK_ID value and the ID values of the subject, predicate, and object.

• Descriptive error message (Unsatisfiable class. in Example 2-5)

The output in Example 2-5 indicates that the error is caused by one triple that asserts that a class is a subclass of an empty class owl:Nothing.

2.2.6 Using SEM_APIS.CREATE_ENTAILMENT for RDFS Inference

In addition to accepting OWL vocabularies, the SEM_APIS.CREATE_ENTAILMENT procedure accepts RDFS rulebases. The following example shows RDFS inference (all standard RDFS rules are defined in http://www.w3.org/TR/rdf-mt/):

EXECUTE sem_apis.create_entailment('rdfstst_idx', sem_models('my_model'), sem_rulebases('RDFS'));

Because rules RDFS4A, RDFS4B, RDFS6, RDFS8, RDFS10, RDFS13 may not generate meaningful inference for your applications, you can deselect those components for faster inference. The following example deselects these rules.

EXECUTE sem_apis.create_entailment('rdfstst_idx', sem_models('my_model'), sem_rulebases('RDFS'), SEM_APIS.REACH_CLOSURE, -
 'RDFS4A-, RDFS4B-, RDFS6-, RDFS8-, RDFS10-, RDFS13-');

2.2.7 Enhancing Inference Performance

This section describes suggestions for improving the performance of inference operations.

• Collect statistics before inferencing. After you load a large RDF/OWL data model, you should execute the SEM_PERF.GATHER_STATS procedure. See the Usage Notes for that procedure (in Chapter 8) for important usage information.

• Allocate sufficient temporary tablespace for inference operations. OWL inference support in Oracle relies heavily on table joins, and therefore uses significant temporary tablespace.

See also Section 2.2.8, "Optimizing owl:sameAs Inference".

2.2.8 Optimizing owl:sameAs Inference

You can optimize inference performance for large owl:sameAs cliques by specifying 'OPT_SAMEAS=T' in the options parameter when performing OWLPrime entailment. (A clique is a graph in which every node of it is connected to, bidirectionally, every other node in the same graph.)

According to OWL semantics, the owl:sameAs construct is treated as an equivalence relation, so it is reflexive, symmetric, and transitive. As a result, during inference a full materialization of owl:sameAs-related entailments could significantly increase the size of the inferred graph. Consider the following example triple set:

:John  owl:sameAs  :John1 .
:John  owl:sameAs  :John2 .
:John2 :hasAge     “32” .

Applying OWLPrime inference (with the SAM component specified) to this set would generate the following new triples:

:John1  owl:sameAs  :John .
:John2  owl:sameAs  :John .
:John1  owl:sameAs  :John2 .
:John2  owl:sameAs  :John1 .
:John   owl:sameAs  :John .
:John1  owl:sameAs  :John1 .
:John2  owl:sameAs  :John2 .
:John   :hasAge     “32” . 
:John1  :hasAge     “32” .

In the preceding example, :John, :John1 and :John2 are connected to each other with the owl:sameAs relationship; that is, they are members of an owl:sameAs clique. To provide optimized inference for large owl:sameAs cliques, you can consolidate owl:sameAs triples without sacrificing correctness by specifying 'OPT_SAMEAS=T' in the options parameter when performing OWLPrime entailment. For example:

EXECUTE sem_apis.create_entailment('M_IDX',sem_models('M'),
   sem_rulebases('OWLPRIME'),null,null,'OPT_SAMEAS=T');

When you specify this option, for each owl:sameAs clique, one resource from the clique is chosen as a canonical representative and all of the inferences for that clique are consolidated around that resource. Using the preceding example, if :John1 is the clique representative, after consolidation the inferred graph would contain only the following triples:

:John1 owl:sameAs :John1 .
:John1 :hasAge    “32” .

Some overhead is incurred with owl:sameAs consolidation. During inference, all asserted models are copied into the inference partition, where they are consolidated together with the inferred triples. Additionally, for very large asserted graphs, consolidating and removing duplicate triples incurs a large run-time overhead, so the OPT_SAMEAS=T option is recommended only for ontologies that have a large number of owl:sameAs relationships and large clique sizes.

After the OPT_SAMEAS=T option has been used for an entailment, all subsequent uses of SEM_APIS.CREATE_ENTAILMENT for that entailment must also use OPT_SAMEAS=T, or an error will be reported. To disable optimized sameAs handling, you must first drop the entailment.

Clique membership information is stored in a view named MDSYS.SEMCL_entailment-name, where entailment-name is the name of the entailment (rules index). Each MDSYS.SEMCL_entailment-name view has the columns shown in Table 2-3.

To save space, the MDSYS.SEMCL_entailment-name view does not contain reflexive rows like (CLIQUE_ID, CLIQUE_ID).

SELECT A FROM TABLE (
  SEM_MATCH ('(?A :hasAge “32”)',SEM_MODELS('M'),  
    SEM_RULEBASES('OWLPRIME'),NULL, NULL));

SELECT V.VALUE_NAME A_VAL FROM TABLE (
  SEM_MATCH ('(?A :hasAge “32”)',SEM_MODELS('M'), 
    SEM_RULEBASES('OWLPRIME'), NULL, NULL)) Q,
    MDSYS.RDF_VALUE$ V, MDSYS.SEMCL_M_IDX C
  WHERE V.VALUE_ID  = C.VALUE_ID 
     AND C.CLIQUE_ID = Q.A$RDFVID
  UNION ALL
    SELECT A A_VAL FROM TABLE (
      SEM_MATCH ('(?A :hasAge “32”)',SEM_MODELS('M'),  
        SEM_RULEBASES('OWLPRIME'),NULL, NULL));

SELECT V.VALUE_NAME A_VAL FROM TABLE (
  SEM_MATCH ('(?A <http://hasAge> "33")',SEM_MODELS('M'), 
   SEM_RULEBASES('OWLPRIME'), NULL, NULL)) Q,
  MDSYS.RDF_VALUE$ V, 
   (SELECT value_id, clique_id FROM MDSYS.SEMCL_M_IDX 
  UNION ALL
    SELECT DISTINCT clique_id, clique_id 
      FROM MDSYS.SEMCL_M_IDX) C
 WHERE Q.A$RDFVID  = c.clique_id  (+)
   AND V.VALUE_ID  = nvl(C.VALUE_ID, Q.A$RDFVID);

2.2.9 Performing Incremental Inference

Incremental inference can be used to update entailments (rules indexes) efficiently after triple additions. There are two ways to enable incremental inference for an entailment:

• Specify the options parameter value INC=T when creating the entailment. For example:

  EXECUTE sem_apis.create_entailment ('M_IDX',sem_models('M'),
    sem_rulebases('OWLPRIME'),null,null, 'INC=T');
  

• Use the SEM_APIS.ENABLE_INC_INFERENCE procedure.

  If you use this procedure, the entailment must have a VALID status. Before calling the procedure, if you do not own the models involved in the entailment, you must ensure that the respective model owners have used the SEM_APIS.ENABLE_CHANGE_TRACKING procedure to enable change tracking for those models.

When incremental inference is enabled for an entailment, the parameter INC=T must be specified when invoking the SEM_APIS.CREATE_ENTAILMENT procedure for that entailment.

Incremental inference for an entailment depends on triggers for the application tables of the models involved in creating the entailment. This means that incremental inference works only when triples are inserted in the application tables underlying the entailment using conventional path loads, unless you specify the triples by using the delta_in parameter in the call to the SEM_APIS.CREATE_ENTAILMENT procedure, as in the following example, in which the triples from model M_NEW will be added to model M, and entailment M_IDX will be updated with the new inferences:

EXECUTE sem_apis.create_entailment('M_IDX', sem_models('M'),
  sem_rulebases('OWLPRIME''), SEM_APIS.REACH_CLOSURE, null, null,
  sem_models('M_NEW'));
  

Another way to bypass the conventional path loading requirement when using incremental inference is to set the UNDO_RETENTION parameter to cover the intervals between entailments when you perform bulk loading. For example, if the last entailment was created 6 hours ago, the UNDO_RETENTION value should be set to greater than 6 hours; if it is less than that, then (given a heavy workload and limited undo space) it is not guaranteed that all relevant undo information will be preserved for incremental inference to apply. In such cases, the SEM_APIS.CREATE_ENTAILMENT procedure falls back to regular (non-incremental) inference.

To check if change tracking is enabled on a model, use the SEM_APIS.GET_CHANGE_TRACKING_INFO procedure. To get additional information about incremental inference for an entailment, use the SEM_APIS.GET_INC_INF_INFO procedure.

The following restrictions apply to incremental inference:

• It does not work with optimized owl:sameAs handling (OPT_SAMEAS), user-defined rules, VPD-enabled models, or version-enabled models.

• It supports only the addition of triples. With updates or deletions, the entailment will be completely rebuilt.

• It depends on triggers on application tables.

• Column types (RAW8 or NUMBER) used in incremental inference must be consistent. For instance, if RAW8=T is used to build the entailment initially, then for every subsequent SEM_APIS.CREATE_ENTAILMENT call the same option must be used. To change the column type to NUMBER, you must drop and rebuild the entailment.

2.2.10 Using Parallel Inference

Parallel inference can improve inference performance by taking advantage of the capabilities of a multi-core or multi-CPU architectures. To use parallel inference, specify the DOP (degree of parallelism) keyword and an appropriate value when using the SEM_APIS.CREATE_ENTAILMENT procedure. For example:

EXECUTE sem_apis.create_entailment('M_IDX',sem_models('M'), 
      sem_rulebases('OWLPRIME'), sem_apis.REACH_CLOSURE, null, 'DOP=4');

Specifying the DOP keyword causes parallel execution to be enabled for an Oracle-chosen set of inference components

The success of parallel inference depends heavily on a good hardware configuration of the system on which the database is running. The key is to have a "balanced" system that implements the best practices for database performance tuning and Oracle SQL parallel execution. For example, do not use a single 1 TB disk for an 800 GB database, because executing SQL statements in parallel on a single physical disk can even be slower than executing SQL statements in serial mode. Parallel inference requires ample memory; for each CPU core, you should have at least 4 GB of memory.

Parallel inference is best suited for large ontologies; however, inference performance can also improve for small ontologies.

There is some transient storage overhead associated with using parallel inference. Parallel inference builds a source table that includes all triples based on all the source RDF/OWL models and existing inferred graph. This table might use an additional 10 to 30 percent of storage compared to the space required for storing data and index of the source models.

2.2.11 Performing Selective Inferencing (Advanced Information)

Selective inferencing is component-based inferencing, in which you limit the inferencing to specific OWL components that you are interested in. To perform selective inferencing, use the inf_components_in parameter to the SEM_APIS.CREATE_ENTAILMENT procedure to specify a comma-delimited list of components. The final inferencing is determined by the union of rulebases specified and the components specified.

Example 2-6 limits the inferencing to the class hierarchy from subclass (SCOH) relationship and the property hierarchy from subproperty (SPOH) relationship. This example creates an empty rulebase and then specifies the two components ('SCOH,SPOH') in the call to the SEM_APIS.CREATE_ENTAILMENT procedure.

EXECUTE sem_apis.create_rulebase('my_rulebase');
 
EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), sem_rulebases('my_rulebase'), SEM_APIS.REACH_CLOSURE, 'SCOH,SPOH');

The following component codes are available: SCOH, COMPH, DISJH, SYMMH, INVH, SPIH, MBRH, SPOH, DOMH, RANH, EQCH, EQPH, FPH, IFPH, DOM, RAN, SCO, DISJ, COMP, INV, SPO, FP, IFP, SYMM, TRANS, DIF, SAM, CHAIN, HASKEY, ONEOF, INTERSECT, INTERSECTSCOH, MBRLST, PROPDISJH, SKOSAXIOMS, SNOMED, SVFH, THINGH, THINGSAM, UNION, RDFP1, RDFP2, RDFP3, RDFP4, RDFP6, RDFP7, RDFP8AX, RDFP8BX, RDFP9, RDFP10, RDFP11, RDFP12A, RDFP12B, RDFP12C, RDFP13A, RDFP13B, RDFP13C, RDFP14A, RDFP14BX, RDFP15, RDFP16, RDFS2, RDFS3, RDFS4a, RDFS4b, RDFS5, RDFS6, RDFS7, RDFS8, RDFS9, RDFS10, RDFS11, RDFS12, RDFS13

The rules corresponding to components with a prefix of RDFP can be found in Completeness, decidability and complexity of entailment for RDF Schema and a semantic extension involving the OWL vocabulary, by H.J. Horst.

The syntax for deselecting a component is component_name followed by a minus (-) sign. For example, the following statement performs OWLPrime inference without calculating the subClassOf hierarchy:

EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), sem_rulebases('OWLPRIME'), SEM_APIS.REACH_CLOSURE, 'SCOH-');

By default, the OWLPrime rulebase implements the transitive semantics of owl:sameAs. OWLPrime does not include the following rules (semantics):

U   owl:sameAs   V  .
U     p    X  .        ==>   V  p   X   .
 
U   owl:sameAs   V  .
X     p    U  .        ==>   X   p   V   .

The reason for not including these rules is that they tend to generate many assertions. If you need to include these assertions, you can include the SAM component code in the call to the SEM_APIS.CREATE_ENTAILMENT procedure.

2.3.1 Using the SEM_RELATED Operator

Referring to the cancer ontology example in Section 2.1.1, consider the following query that requires semantic matching: Find all patients whose diagnosis is of the type 'Immune_System_Disorder'. A typical database query of the PATIENTS table (described in Section 2.1.1) involving syntactic match will not return any rows, because no rows have a DIAGNOSIS column containing the exact value Immune_System_Disorder. For example the following query will not return any rows:

SELECT diagnosis FROM patients WHERE diagnosis = 'Immune_System_Disorder';

However, many rows in the patient data table are relevant, because their diagnoses fall under this class. Example 2-7 uses the SEM_RELATED operator (instead of lexical equality) to retrieve all the relevant rows from the patient data table. (In this example, the term Immune_System_Disorder is prefixed with a namespace, and the default assumption is that the values in the table column also have a namespace prefix. However, that might not always be the case, as explained in Section 2.3.5.)

SELECT diagnosis FROM patients 
  WHERE SEM_RELATED (diagnosis, 
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;

The SEM_RELATED operator has the following attributes:

SEM_RELATED(
  sub  VARCHAR2,
  predExpr  VARCHAR2,
  obj  VARCHAR2,
  ontologyName  SEM_MODELS,
  ruleBases  SEM_RULEBASES,
  index_status  VARCHAR2,
  lower_bound INTEGER,
  upper_bound INTEGER
 ) RETURN INTEGER;

The sub attribute is the name of table column that is being searched. The terms in the table column are typically the subject in a <subject, predicate, object> triple pattern.

The predExpr attribute represents the predicate that can appear as a label of the edge on the path from the subject node to the object node.

The obj attribute represents the term in the ontology for which related terms (related by the predExpr attribute) have to be found in the table (in the column specified by the sub attribute). This term is typically the object in a <subject, predicate, object> triple pattern. (In a query with the equality operator, this would be the query term.)

The ontologyName attribute is the name of the ontology that contains the relationships between terms.

The rulebases attribute identifies one or more rulebases whose rules have been applied to the ontology to infer new relationships. The query will be answered based both on relationships from the ontology and the inferred new relationships when this attribute is specified.

The index_status optional attribute lets you query the data even when the relevant entailment (created when the specified rulebase was applied to the ontology) does not have a valid status. If this attribute is null, the query returns an error if the entailment does not have a valid status. If this attribute is not null, it must be the string VALID, INCOMPLETE, or INVALID, to specify the minimum status of the entailment for the query to succeed. Because OWL does not guarantee monotonicity, the value INCOMPLETE should not be used when an OWL Rulebase is specified.

The lower_bound and upper_bound optional attributes let you specify a bound on the distance measure of the relationship between terms that are related. See Section 2.3.2 for the description of the distance measure.

The SEM_RELATED operator returns 1 if the two input terms are related with respect to the specified predExpr relationship within the ontology, and it returns 0 if the two input terms are not related. If the lower and upper bounds are specified, it returns 1 if the two input terms are related with a distance measure that is greater than or equal to lower_bound and less than or equal to upper_bound.

2.3.2 Using the SEM_DISTANCE Ancillary Operator

The SEM_DISTANCE ancillary operator computes the distance measure for the rows filtered using the SEM_RELATED operator. The SEM_DISTANCE operator has the following format:

SEM_DISTANCE (number) RETURN NUMBER;

The number attribute can be any number, as long as it matches the number that is the last attribute specified in the call to the SEM_RELATED operator (see Example 2-8). The number is used to match the invocation of the ancillary operator SEM_DISTANCE with a specific SEM_RELATED (primary operator) invocation, because a query can have multiple invocations of primary and ancillary operators.

Example 2-8 expands Example 2-7 to show several statements that include the SEM_DISTANCE ancillary operator, which gives a measure of how closely the two terms (here, a patient's diagnosis and the term Immune_System_Disorder) are related by measuring the distance between the terms. Using the cancer ontology described in Section 2.1.1, the distance between AIDS and Immune_System_Disorder is 3.

SELECT diagnosis, SEM_DISTANCE(123) FROM patients 
  WHERE SEM_RELATED (diagnosis, 
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1;
 
SELECT diagnosis FROM patients 
  WHERE SEM_RELATED (diagnosis,
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1
  ORDER BY SEM_DISTANCE(123);
 
SELECT diagnosis, SEM_DISTANCE(123) FROM patients 
  WHERE SEM_RELATED (diagnosis,
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1 
  WHERE SEM_DISTANCE(123) <= 3;

Example 2-9 uses distance information to restrict the number of rows returned by the primary operator. All rows with a term related to the object attribute specified in the SEM_RELATED invocation, but with a distance of greater than or equal to 2 and less than or equal to 4, are retrieved.

SELECT diagnosis FROM patients 
  WHERE SEM_RELATED (diagnosis,
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime'), 2, 4) = 1;

In Example 2-9, the lower and upper bounds are specified using the lower_bound and upper_bound parameters in the SEM_RELATED operator instead of using the SEM_DISTANCE operator. The SEM_DISTANCE operator can be also be used for restricting the rows returned, as shown in the last SELECT statement in Example 2-8.

2.3.3 Creating a Semantic Index of Type MDSYS.SEM_INDEXTYPE

When using the SEM_RELATED operator, you can create a semantic index of type MDSYS.SEM_INDEXTYPE on the column that contains the ontology terms. Creating such an index will result in more efficient execution of the queries. The CREATE INDEX statement must contain the INDEXTYPE IS MDSYS.SEM_INDEXTYPE clause, to specify the type of index being created.

Example 2-10 creates a semantic index named DIAGNOSIS_SEM_IDX on the DIAGNOSIS column of the PATIENTS table using the Cancer_Ontology ontology.

CREATE INDEX diagnosis_sem_idx
  ON patients (diagnosis) 
  INDEXTYPE IS MDSYS.SEM_INDEXTYPE;

The column on which the index is built (DIAGNOSIS in Example 2-10) must be the first parameter to the SEM_RELATED operator, in order for the index to be used. If it not the first parameter, the index is not used during the execution of the query.

To improve the performance of certain semantic queries, you can cause statistical information to be generated for the semantic index by specifying one or more models and rulebases when you create the index. Example 2-11 creates an index that will also generate statistics information for the specified model and rulebase. The index can be used with other models and rulebases during query, but the statistical information will be used only if the model and rulebase specified during the creation of the index are the same model and rulebase specified in the query.

CREATE INDEX diagnosis_sem_idx
  ON patients (diagnosis) 
  INDEXTYPE IS MDSYS.SEM_INDEXTYPE('ONTOLOGY_MODEL(medical_ontology), 
    RULEBASE(OWLPrime)');

The statistical information is useful for queries that return top-k results sorted by semantic distance. Example 2-12 shows such a query.

SELECT /*+ FIRST_ROWS */ diagnosis FROM patients 
  WHERE SEM_RELATED (diagnosis,
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1
  ORDER BY SEM_DISTANCE(123);

2.3.4 Using SEM_RELATED and SEM_DISTANCE When the Indexed Column Is Not the First Parameter

If an index of type MDSYS.SEM_INDEXTYPE has been created on a table column that is the first parameter to the SEM_RELATED operator, the index will be used. For example, the following query retrieves all rows that have a value in the DIAGNOSIS column that is a subclass of (rdfs:subClassOf) Immune_System_Disorder.

SELECT diagnosis FROM patients 
  WHERE SEM_RELATED (diagnosis, 
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;

Assume, however, that this query instead needs to retrieve all rows that have a value in the DIAGNOSIS column for which Immune_System_Disorder is a subclass. You could rewrite the query as follows:

SELECT diagnosis FROM patients 
  WHERE SEM_RELATED
    ('<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', 
    diagnosis, 
    sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;

However, in this case a semantic index on the DIAGNOSIS column will not be used, because it is not the first parameter to the SEM_RELATED operator. To cause the index to be used, you can change the preceding query to use the inverseOf keyword, as follows:

SELECT diagnosis FROM patients 
  WHERE SEM_RELATED (diagnosis,
    'inverseOf(http://www.w3.org/2000/01/rdf-schema#subClassOf)',
    '<http://www.example.org/medical_terms/Immune_System_Disorder>', 
    sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;

This form causes the table column (on which the index is built) to be the first parameter to the SEM_RELATED operator, and it retrieves all rows that have a value in the DIAGNOSIS column for which Immune_System_Disorder is a subclass.

2.3.5 Using URIPREFIX When Values Are Not Stored as URIs

By default, the semantic operator support assumes that the values stored in the table are URIs. These URIs can be from different namespaces. However, if the values in the table do not have URIs, you can use the URIPREFIX keyword to specify a URI when you create the semantic index. In this case, the specified URI is prefixed to the value in the table and stored in the index structure. (One implication is that multiple URIs cannot be used).

Example 2-13 creates a semantic index that uses a URI prefix.

CREATE INDEX diagnosis_sem_idx
  ON patients (diagnosis) 
  INDEXTYPE IS MDSYS.SEM_INDEXTYPE
  PARAMETERS('URIPREFIX(<http://www.example.org/medical/>)');

Note that the slash (/) character at the end of the URI is important, because the URI is prefixed to the table value (in the index structure) without any parsing.