B JMS and AQ XML Servlet Error Messages

A list of error messages is provided to aid you in troubleshooting problems.

JMS Error Messages

JMS-101 Invalid delivery mode (string): Cause: The delivery mode is not supported; Action: The valid delivery mode is AQjmsConstants.PERSISTENT

JMS-102 Feature not supported (string): Cause: This feature is not supported in the current release; Action: Self-explanatory

JMS-104 Message Payload must be specified: Cause: The message payload was null; Action: Specify a non-null payload for the message

JMS-105 Agent must be specified: Cause: AQjmsAgent object was null; Action: Specify a valid AQjmsAgent representing the remote subscriber

JMS-106 Cannot have more than one open Session on a JMSConnection: Cause: There is already one open JMS session on the connection. Cannot have more than one open session on a connection; Action: Close the open session and then open a new one

JMS-107 Operation not allowed on (string): Cause: The specified operation is not allowed on this object; Action: Self-explanatory

JMS-108 Messages of type (string) not allowed with Destinations containing payload of type (string): Cause: There was a mismatch between the message type being used and the payload type specified for the destination; Action: Use the message type that maps to the payload specified for the queue table that contains this destination

JMS-109 Class not found: (string): Cause: The specified class was not found; Action: Make sure your CLASSPATH contains the class

JMS-110 Property (string) not writeable: Cause: An attempt was made to update a read-only message header field or property; Action: Self-explanatory

JMS-111 Connection must be specified: Cause: The connection object was null; Action: Specify a non-null JDBC connection

JMS-112 Connection is invalid: Cause: The JDBC connection is invalid; Action: Specify a non-null oracle JDBC connection

JMS-113 Connection is in stopped state: Cause: An attempt was made to receive messages on a connection that is in stopped state; Action: Start the connection

JMS-114 Connection is closed: Cause: An attempt was made to use a Connection that has been closed; Action: Create a new connection

JMS-115 Consumer is closed: Cause: An attempt was mode to use a Consumer that has been closed; Action: Create a new Message Consumer

JMS-116 Subscriber name must be specified: Cause: Subscriber name was null; Action: Specify a non-null subscription name

JMS-117 Conversion failed - invalid property type: Cause: An error occurred while converting the property to the requested type; Action: Use the method corresponding to the property data type to retrieve it

JMS-119 Invalid Property value: Cause: The property value specified is invalid; Action: Use the appropriate type of value for the property being set

JMS-120 Dequeue failed: Cause: An error occurred while receiving the message; Action: See message inside the JMSException and linked SQLException for more information

JMS-121 DestinationProperty must be specified: Cause: A null AQjmsDestinationProperty was specified while creating a queue/topic; Action: Specify a non-null AQjmsDestinationProperty for the destination

JMS-122 Internal error (string): Cause: Internal error occurred; Action: Call Support

JMS-123 Interval must be at least (integer) seconds: Cause: An invalid interval was specified; Action: The interval must be greater than 30 seconds

JMS-124 Invalid Dequeue mode: Cause: Invalid dequeue mode was specified; Action: Valid Dequeue modes are AQConstants.DEQUEUE_BROWSE, AQConstants.DEQUEUE_REMOVE, AQConstants.DEQUEUE_LOCKED, AQConstants.DEQUEUE_REMOVE_NODATA

JMS-125 Invalid Queue specified: Cause: An invalid Queue object was specified; Action: Specify a valid Queue handle

JMS-126 Invalid Topic specified: Cause: An invalid Topic object was specified; Action: Specify a valid Topic handle

JMS-127 Invalid Destination: Cause: An invalid destination object was specified; Action: Specify a valid destination (Queue/Topic) object

JMS-128 Invalid Navigation mode: Cause: An invalid navigation mode was specified; Action: The valid navigation modes are AQjmsConstants.NAVIGATION_FIRST_MESSAGE, AQjmsConstants.NAVIGATION_NEXT_MESSAGE, AQjmsConstants.NAVIGATION_NEXT_TRANSACTION

JMS-129 Invalid Payload type: Cause: There was a mismatch between the message type being used and the payload type specified for the destination; Action: Use the message type that maps to the payload specified for the queue table that contains this destination. For ADT messages, use the appropriate CustomDatum factory to create the message consumer

JMS-130 JMS queue cannot be multi-consumer enabled: Cause: An attempt was made to get a AQ multi-consumer queue as a JMS queue; Action: JMS queues cannot be multi-consumer enabled

JMS-131 Session is closed: Cause: An attempt was made to use a session that has been closed; Action: Open a new session

JMS-132 Maximum number of properties (integer) exceeded: Cause: Maximum number of user defined properties for the message has been exceeded; Action: Self-explanatory

JMS-133 Message must be specified: Cause: Message specified was null; Action: Specify a non-null message

JMS-134 Name must be specified: Cause: Queue or Queue table Name specified was null; Action: Specify a non-null name

JMS-135 Driver (string) not supported: Cause: The specified driver is not supported; Action: Valid drivers are oci8 and thin. To use the kprb driver get the kprb connection using getDefaultConnection() and use the static createTopicConnection and createQueueConnection methods

JMS-136 Payload factory can only be specified for destinations with ADT payloads: Cause: A CustomDatumFactory was specified for consumers on destinations not containing ADT payloads; Action: This field must be set to null for destinations containing payloads of type SYS.AQ$_JMS_TEXT_MESSAGE, SYS.AQ$_JMS_BYTES_MESSAGE, SYS.AQ$_JMS_MAP_MESSAGE, SYS.AQ$_JMS_OBJECT_MESSAGE, SYS.AQ$_JMS_STREAM_MESSAGE

JMS-137 Payload factory must be specified for destinations with ADT payloads: Cause: CustomDatumFactory was not specified for destinations containing ADT payloads; Action: For destinations containing ADT messages, a CustomDatumFactory for a java class that maps to the SQL ADT type of the destination must be specified

JMS-138 Producer is closed: Cause: An attempt was made to use a producer that has been closed; Action: Create a new Message Producer

JMS-139 Property name must be specified: Cause: Property name was null; Action: Specify a non-null property name

JMS-140 Invalid System property: Cause: Invalid system property name specified.; Action: Specify one of the valid JMS system properties

JMS-142 JMS topic must be created in multi-consumer enabled queue tables: Cause: An attempt was made to create a JMS topic in a single-consumer queue table; Action: JMS topics can only be created in queue tables that are multi-consumer enabled

JMS-143 Queue must be specified: Cause: Null queue was specified; Action: Specify a non-null queue

JMS-144 JMS queue cannot be created in multiconsumer enabled queue tables: Cause: An attempt was made to create a JMS queue in a multi-consumer queue table; Action: JMS queues can only be created in queue tables that are not multi-consumer enabled

JMS-145 Invalid recipient list: Cause: The recipient list specified was empty; Action: Specify a recipient list with at least one recipient

JMS-146 Registration failed: Cause: An error occurred while registering the type in the type map; Action: Self-explanatory

JMS-147 Invalid ReplyTo destination type: Cause: The ReplyTo destination object type is invalid; Action: The ReplyTo destination must be of type AQjmsAgent

JMS-148 Property name size exceeded: Cause: The property name is greater than the maximum size; Action: Specify a property name that is less than 100 characters

JMS-149 Subscriber must be specified: Cause: Subscriber specified was null; Action: Specify a non-null subscriber

JMS-150 Property not supported: Cause: An attempt was made to use a property that is not supported; Action: Self-explanatory

JMS-151 Topics cannot be of type EXCEPTION: Cause: Topics cannot be of type AQjmsConstants.EXCEPTION; Action: Specify topics to be of type AQjmsConstants.NORMAL

JMS-153 Invalid System property type: Cause: The type of the value specified does not match the type defined for the system property being set; Action: Use the correct type for the setting the system property

JMS-154 Invalid value for sequence deviation: Cause: The sequence deviation is invalid; Action: Valid values are AQEnqueueOption.DEVIATION_BEFORE, AQEnqueueOption.DEVIATION_TOP

JMS-155 AQ Exception (string): Cause: An error occurred in the AQ java layer; Action: See the message inside the JMSException and the linked exception for more information

JMS-156 Invalid Class (string): Cause: Class specified is invalid; Action: Make sure your CLASSPATH has the specified class

JMS-157 IO Exception (string): Cause: IO exception; Action: See message is JMSException for details

JMS-158 SQL Exception (string): Cause: SQL Exception; Action: See message inside linked SQLException for details

JMS-159 Invalid selector (string): Cause: The selector specified is either invalid or too long; Action: Check the syntax of the selector

JMS-160 EOF Exception (string): Cause: EOF exception occurred while reading the byte stream; Action: Self-explanatory

JMS-161 MessageFormat Exception: (string): Cause: An error occurred while converting the stream data to specified type; Action: Check the type of data expected on the stream and use the appropriate read method

JMS-162 Message not Readable: Cause: Message is in write-only mode; Action: Call the reset method to make the message readable

JMS-163 Message not Writeable: Cause: Message is in read-only mode; Action: Use the clearBody method to make the message writeable

JMS-164 No such element: Cause: Element with specified name was not found in the map message; Action: Self-explanatory

JMS-165 Maximum size of property value exceeded: Cause: The property value exceeded the maximum length allowed; Action: Values for JMS defined properties can be a maximum of length of 100, Values for User defined properties can have a maximum length of 2000

JMS-166 Topic must be specified: Cause: Topic specified was null; Action: Specify a non-null topic

JMS-167 Payload factory or Sql_data_class must be specified: Cause: Payload factory or Sql_data_class not specified for queues containing object payloads; Action: Specify a CustomDatumFactory or the SQLData class of the java object that maps to the ADT type defined for the queue.

JMS-168 Cannot specify both payload factory and sql_data_class: Cause: Both CustomDatumFactory and SQLData class were specified during dequeue; Action: Specify either the CustomDatumFactory or the SQLData class of the java object that maps to the ADT type defined for the queue.

JMS-169 Sql_data_class cannot be null: Cause: SQLData class specified is null; Action: Specify the SQLData class that maps to the ADT type defined for the queue

JMS-171 Message is not defined to contain (string): Cause: Invalid payload type in message; Action: Check if the queue is defined to contain RAW or OBJECT payloads and use the appropriate payload type in the message

JMS-172 More than one queue table matches query (string): Cause: More than one queue table matches the query; Action: Specify both owner and queue table name

JMS-173 Queue Table (string) not found: Cause: The specified queue table was not found; Action: Specify a valid queue table

JMS-174 Class must be specified for queues with object payloads\n. Use dequeue(deq_option,payload_fact) or dequeue(deq_option, sql_data_cl): Cause: This dequeue method cannot be used to dequeue from queues with OBJECT payloads; Action: Use the either dequeue(deq_option, payload_fact) or dequeue(deq_option, sql_data_cl)

JMS-175 DequeueOption must be specified: Cause: DequeueOption specified is null; Action: Specify a non-null dequeue option

JMS-176 EnqueueOption must be specified: Cause: EnqueueOption specified is null; Action: Specify a non-null enqueue option

JMS-177 Invalid payload type: Use dequeue(deq_option) for raw payload queues: Cause: This method cannot be used to dequeue from queues with RAW payload; Action: Use the dequeue(deq_option) method

JMS-178 Invalid Queue name - (string): Cause: The queue name specified is null or invalid; Action: Specify a queue name that is not null. The queue name must not be qualified with the schema name. The schema name must be specified as the value of the owner parameter

JMS-179 Invalid Queue Table name - (string): Cause: The queue table name specified is null or invalid; Action: Specify a queue table name that is not null. The queue table name must not be qualified with the schema name. The schema name must be specified as the value of the owner parameter

JMS-180 Invalid Queue Type: Cause: Queue type is invalid; Action: Valid types are AQConstants.NORMAL or AQConstants.EXCEPTION

JMS-181 Invalid value for wait_time: Cause: Invalid value for wait type; Action: Wait time can be AQDequeueOption.WAIT_FOREVER, AQDequeueOption.WAIT_NONE or any value greater than 0

JMS-182 More than one queue matches query: Cause: More than one queue matches query; Action: Specify both the owner and name of the queue

JMS-183 No AQ driver registered: Cause: No AQDriver registered; Action: Make sure that the AQ java driver is registered. Use Class.forName("oracle.AQ.AQOracleDriver")

JMS-184 Queue object is invalid: Cause: The queue object is invalid; Action: The underlying JDBC connection may have been closed. Get the queue handle again

JMS-185 QueueProperty must be specified: Cause: AQQueueProperty specified is null; Action: Specify a non-null AQQueueProperty

JMS-186 QueueTableProperty must be specified: Cause: QueueTableProperty specified is null; Action: Specify a non-null AQQueueTableProperty

JMS-187 Queue Table must be specified: Cause: Queue Table specified is null; Action: Specify a non-null queue table

JMS-188 QueueTable object is invalid: Cause: The queue table object is invalid; Action: The underlying JDBC connection may have been closed. Get the queue table handle again

JMS-189 Byte array too small: Cause: The byte array given is too small to hold the data requested; Action: Specify a byte array that is large enough to hold the data requested or reduce the length requested

JMS-190 Queue (string) not found: Cause: The specified queue was not found; Action: Specify a valid queue

JMS-191 sql_data_cl must be a class that implements SQLData interface: Cause: The class specified does not support the java.sql.SQLData interface; Action: Self-explanatory

JMS-192 Invalid Visibility value: Cause: Visibility value specified is invalid; Action: Valid values areAQConstants.VISIBILITY_ONCOMMIT, AQConstants.VISIBILITY_IMMEDIATE

JMS-193 JMS queues cannot contain payload of type RAW: Cause: An attempt was made to create a JMS queue with RAW payload; Action: JMS queues/topics cannot contain RAW payload

JMS-194 Session object is invalid: Cause: Session object is invalid; Action: The underlying JDBC connection may have been closed. Create a new session

JMS-195 Invalid object type: object must implement CustomDatum or SQLData interface: Cause: Invalid object type specified; Action: Object must implement CustomDatum or SQLData interface

JMS-196 Cannot have more than one open QueueBrowser for the same destination on a JMS Session: Cause: There is already an open QueueBrowser for this queue on this session; Action: There cannot be more than one queue browser for the same queue in a particular session. Close the existing QueueBrowser and then open a new one

JMS-197 Agent address must be specified for remote subscriber: Cause: Address field is null for remote subscriber; Action: The address field must contain the fully qualified name of the remote topic

JMS-198 Invalid operation: Privileged message listener set for the Session: Cause: The client tried to use a message consumer to receive messages when the session message listener was set.; Action: Use the session's message listener to consume messages. The consumer's methods for receiving messages must not be used.

JMS-199 Registration for notification failed: Cause: Listener Registration failed; Action: See error message in linked Exception for details

JMS-200 Destination must be specified: Cause: Destination is null; Action: Specify a non-null destination

JMS-201 All Recipients in recipient_list must be specified: Cause: One or more elements in the recipient list are null; Action: All AQjmsAgents in the recipient list must be specified

JMS-202 Unregister for asynchronous receipt of messages failed: Cause: An error occurred while removing the registration of the consumer with the database for asynchronous receipt; Action: Check error message in linked exception for details

JMS-203 Payload Factory must be specified: Cause: Null Payload Factory was specified; Action: Specify a non null payload factory

JMS-204 An error occurred in the AQ JNI layer: Cause: JNI Error; Action: Check error message in linked exception for details

JMS-205 Naming Exception: Cause: Naming exception; Action: Check error message in linked exception for details

JMS-206 XA Exception XAError-{0} :: OracleError-{1}: Cause: An error occurred in the XA layer; Action: See the message inside the linked XAException for more information

JMS-207 JMS Exception {0}: Cause: An error occurred in the JMS layer; Action: See the message inside the linked JMSException for more information

JMS-208 XML SQL Exception: Cause: An error occurred in the XML SQL layer; Action: See the message inside the linked AQxmlException for more information

JMS-209 XML SAX Exception: Cause: An error occurred in the XML SAX layer; Action: See the message inside the linked AQxmlException for more information

JMS-210 XML Parse Exception: Cause: An error occurred in the XML Parser layer; Action: See the message inside the linked AQxmlException for more information

JMS-220 Connection no longer available: Cause: Connection to the database no longer available.; Action: Comment: This may happen if the database/network/machine is not accessible. This may be a transient failure.

JMS-221 Free physical database connection unavailable in connection pool: Cause: A free physical database connection was not available in the OCI connection pool in order to perform the specified operation.; Action: Try performing the operation later

AQ XML Servlet Error Messages

JMS-400 Destination name must be specified: Cause: A null Destination name was specified; Action: Specify a non-null destination name

JMS-402 Class not found: {0}: Cause: The specified class was not found; Action: Make sure your CLASSPATH contains the class specified in the error message

JMS-403 IO Exception {0}: Cause: IO exception; Action: See the message inside the linked AQxmlException for more information

JMS-404 XML Parse Exception: Cause: An error occurred in the XML Parser layer; Action: See the message inside the linked AQxmlException for more information

JMS-405 XML SAX Exception: Cause: An error occurred in the XML SAX layer; Action: See the message inside the linked AQxmlException for more information

JMS-406 JMS Exception {0}: Cause: An error occurred in the JMS layer; Action: See the message inside the linked JMSException for more information

JMS-407 Operation not allowed on {0}: Cause: The specified operation is not allowed on this object; Action: Check that the user performing the operation has the required privileges

JMS-408 Conversion failed - invalid property type: Cause: An error occurred while converting the property to the requested type; Action: Use the method corresponding to the property data type to retrieve it

JMS-409 No such element: Cause: Element with specified name was not found in the map message; Action: Specify a valid element name

JMS-410 XML SQL Exception: Cause: An error occurred in the JDBC SQL layer; Action: See the message inside the linked SQLException for more information

JMS-411 Payload body cannot be null: Cause: An invalid body string or document was specified; Action: Specify a non-null body string or document for the payload

JMS-412 Byte conversion failed: Cause: An invalid username/password was specified; Action: Specify a non-null username and password

JMS-413 Autocommit not allowed for operation: Cause: The autocommit flag cannot be set for this operation; Action: Do not set the autocommit flag

JMS-414 Destination owner must be specified: Cause: A null Destination owner was specified; Action: Specify a non-null destination name

JMS-415 Invalid Visibility value: Cause: Visibility value specified is invalid; Action: Valid values are AQxmlConstants.VISIBILITY_ONCOMMIT, AQxmlConstants.VISIBILITY_IMMEDIATE

JMS-416 Invalid Dequeue mode: Cause: Invalid dequeue mode was specified; Action: Valid Dequeue modes are AQxmlConstants.DEQUEUE_BROWSE, AQxmlConstants.DEQUEUE_REMOVE, AQxmlConstants.DEQUEUE_LOCKED, AQxmlConstants.DEQUEUE_REMOVE_NODATA

JMS-417 Invalid Navigation mode

Cause: An invalid navigation mode was specified

Action: The valid navigation modes are:

AQxmlConstants.NAVIGATION_FIRST_MESSAGE
AQxmlConstants.NAVIGATION_NEXT_MESSAGE
AQxmlConstants.NAVIGATION_NEXT_TRANSACTION

JMS-418 Invalid value for wait_time: Cause: Invalid value for wait type; Action: Wait time can be AQDequeueOption.WAIT_FOREVER, AQDequeueOption.WAIT_NONE, or any value greater than 0

JMS-419 Invalid ConnectionPoolDataSource: Cause: A null or invalid ConnectionPoolDataSource was specified; Action: Specify a valid OracleConnectionPoolDataSource object with the correct URL and user/password

JMS-420 Invalid value for cache_size: Cause: An invalid cache_size was specified; Action: Cache size must be greater than 0

JMS-421 Invalid value for cache_scheme

Cause: An invalid cache scheme was specified

Action: The valid cache schemes are:

OracleConnectionCacheImpl.DYNAMIC_SCHEME
OracleConnectionCacheImpl.FIXED_WAIT_SCHEME

JMS-422 Invalid tag - {0}: Cause: An invalid tag was encountered in the XML document; Action: Verify that the XML document conforms to the AQ schema

JMS-423 Invalid value: Cause: An invalid value was specified; Action: Verify that the value specified in the XML document conforms to those specified in the AQ schema

JMS-424 Invalid message header: Cause: The message header specified is null or invalid; Action: Specify a valid message header

JMS-425 Property name must be specified: Cause: Property name was null; Action: Specify a non-null property name

JMS-426 Property does not exist: Cause: Invalid property name specified. The property does not exist; Action: The property does not exist

JMS-427 Subscriber name must be specified: Cause: Subscriber name was null; Action: Specify a non-null subscription name

JMS-428 Valid message must be specified: Cause: Message was null; Action: Specify a non-null message

JMS-429 Register Option must be specified: Cause: Register option is null; Action: Specify a non-null Register Option

JMS-430 Database Link must be specified: Cause: DB Link is null; Action: Specify a non-null Register Option

JMS-431 Sequence Number must be specified: Cause: Register option is null; Action: Specify a non-null Register Option

JMS-432 Status must be specified: Cause: Status option is null; Action: Specify a non-null Register Option

JMS-433 User not authenticated: Cause: User is not authenticated; Action: Check that the user was authenticated by the webserver before connecting to the Servlet

JMS-434 Invalid data source: Cause: Data source is null or invalid; Action: Specify a valid data source for connecting to the database

JMS-435 Invalid schema location: Cause: Schema location is null or invalid; Action: Specify a valid URL for the schema

JMS-436 AQ Exception: Cause: An error occurred in the AQ java layer; Action: See the message inside the AQxmlException and the linked exception for more information

JMS-437 Invalid Destination: Cause: An invalid destination object was specified; Action: Specify a valid destination (Queue/Topic) object

JMS-438 AQ agent {0} not mapped to a valid database user: Cause: The AQ agent specified does not map to a database user which has privileges to perform the requested operation; Action: Use dbms_aqadm.enable_db_access to map the agent to a database user with the required queue privileges

JMS-439 Invalid schema document: Cause: The schema document specified is not valid; Action: Specify a valid URL for the schema document

JMS-440 Invalid operations - agent {0} maps to more than one database user: Cause: The AQ agent mapped to more than one database user in the same session; Action: Map the AQ agent to only one database user. Check the aq$internet_users view for database users that map to this agent.